Plate Lifting Clamps, Vertical Steel Plate Lifting Clamp, Horizontal Steel Plate Lifting Clamp, Multi-Layered Steel Plate Lifting Clamp, India

SAMSON Plate Lifting Clamps

VERTICAL STEEL PLATE LIFTING CLAMP 1 Application : lifting and transporting steel plate vertically 2 Range of working load :1-16 T 3 One clamp is used in the tests but in real cases two or more clamps are recommended. 4 Only one layer of plate being lifted each time. lifting more than one layer of plate is prohibited. The steel plate being lifting shall be kept away from crashing on any other objects. when lifting the steel plate, the handle must be turned up and turned down when unloading. 5 The tested loads of DSQ 1,DSQ2,DSQ3,& DSQ5 are all 2 times of working load limit, the minimum breaking load is 4 times of the working load limit. The tested loads of DSQ8,DSQ12,DSQ16 are 1.5times of the working load limit, the minimum breaking load is 3times of the working load limit.

HORIZONTAL STEEL PLATE LIFTING CLAMP
This clamp is designed to lift and transport steel plate horizontally Range of working load :2-10T Two clamp are used in the tests, but in real case four clamp are recommended The levering beam is needed when the steel plate is too long Tested loading is 2times the Working Load Limit Minimum breaking Load is 4 times the Working Load Limit.

MULTI-LAYERED STEEL PLATE LIFTING CLAMP
This clamp is used in loading multi-layered steel plate simultaneously. Range of loading limit:3-15 T Two clamps are used in the tests, but in real cases four clamps are recommended. The tongue of the clamp can be adjusted according to the thickness of the plate and the levering beam is needed when operating. The steel plate being lifted shall be kept away from crashing on any other objects. The tested load is 2 times of the working load limit, the minimum breaking load is 4 times of the working load limit.